NEWS CENTER

Introduction to the reasons why water softening equipment does not produce soft water or does not operate

Time:

Oct 27,2023

Softened water equipment is mainly used to remove calcium and magnesium in the water and other hardness ions, reduce the production of scale. So what is the reason why softened water equipment does not produce soft water or does not operate?

Introduction to the reasons why water softening equipment does not produce soft water or does not operate
Introduction to the reasons why water softening equipment does not produce soft water or does not operate

Softened water equipment is mainly used to remove calcium and magnesium in the water and other hardness ions, reduce the production of scale. So...Water softening equipmentWhat is the reason why soft water is not produced or operated?

When softening water equipment does not produce soft water in operation, it should be considered first.Bypass valveWhether it is not opened and whether the resin leaks, if so, the bypass valve needs to be opened to check whether the resin tank is damaged. If the salt in the salt tank is insufficient, salt needs to be added to the salt tank.

If the softened water equipment does not operate during operation, it needs to be observed.Power System, so that the device can be powered on normally. In case of water pipe rupture, change the water pipe. In daily life, the use of water softening equipment is also more common.

The above is the softening water equipment does not produce soft water or does not operate the reason. As we all know, if the hardness of household water is too high, it is easy to produce scale. If it is an electric boiler, its heat conversion efficiency will directly affect the quality of the electric boiler, so it is very necessary to install a softened water equipment.

Key words:

water equipment

Previous Page

The importance of reverse osmosis glass fiber reinforced plastic membrane shell in water treatment

Return to List

Next Page

Reverse osmosis glass fiber reinforced plastic membrane shell related introduction

Technical principle and characteristics of membrane-bioreactor

In the membrane-bioreactor, because the membrane module is used to replace the secondary sedimentation tank in the traditional activated sludge process, the solid-liquid separation can be carried out, and the water quality of the effluent in the traditional activated sludge process is not stable enough, and the sludge is easy to expand., Which has the following advantages:

2023-10-27

Chemical Cleaning of Reverse Osmosis Membrane

The cleaning of the membrane is generally divided into physical cleaning and chemical cleaning, and the higher the frequency of chemical cleaning, the greater the damage to the membrane, which seriously affects the service life of the membrane system. Therefore, it is difficult for the relevant technical personnel to master the chemical cleaning of the membrane system.

2023-10-27

The importance of reverse osmosis glass fiber reinforced plastic membrane shell in water treatment

The quality of the reverse osmosis glass fiber reinforced plastic membrane shell in the water supply pretreatment directly affects the service life of the reverse osmosis membrane. No matter whether the water quality of the water supply is surface water or groundwater, it will contain some organic and inorganic pollutants. If these pollutants are directly fed into the reverse osmosis system for operation without pretreatment, those pollutants and suspended solids will remain on the surface of the membrane, causing blockage of the flow channel, increasing the pressure of the membrane element, decreasing the water yield and desalination rate, and even causing serious consequences such as membrane pollution or membrane damage.

2023-10-27