Home
About Us
Company Profile
Honor
Culture
Products
Reverse osmosis equipment
Ultra-pure water equipment
Water softening equipment
Recreated water reuse
Filtration equipment
Cleaning equipment
News
Company News
Industry News
Contact Us
中文
English
Oct 27,2023
Technical principle and characteristics of membrane-bioreactor
In the membrane-bioreactor, because the membrane module is used to replace the secondary sedimentation tank in the traditional activated sludge process, the solid-liquid separation can be carried out, and the water quality of the effluent in the traditional activated sludge process is not stable enough, and the sludge is easy to expand., Which has the following advantages:
MORE >>
Chemical Cleaning of Reverse Osmosis Membrane
The cleaning of the membrane is generally divided into physical cleaning and chemical cleaning, and the higher the frequency of chemical cleaning, the greater the damage to the membrane, which seriously affects the service life of the membrane system. Therefore, it is difficult for the relevant technical personnel to master the chemical cleaning of the membrane system.
The importance of reverse osmosis glass fiber reinforced plastic membrane shell in water treatment
The quality of the reverse osmosis glass fiber reinforced plastic membrane shell in the water supply pretreatment directly affects the service life of the reverse osmosis membrane. No matter whether the water quality of the water supply is surface water or groundwater, it will contain some organic and inorganic pollutants. If these pollutants are directly fed into the reverse osmosis system for operation without pretreatment, those pollutants and suspended solids will remain on the surface of the membrane, causing blockage of the flow channel, increasing the pressure of the membrane element, decreasing the water yield and desalination rate, and even causing serious consequences such as membrane pollution or membrane damage.
Introduction to the reasons why water softening equipment does not produce soft water or does not operate
Softened water equipment is mainly used to remove calcium and magnesium in the water and other hardness ions, reduce the production of scale. So what is the reason why softened water equipment does not produce soft water or does not operate?
Reverse osmosis glass fiber reinforced plastic membrane shell related introduction
FRP membrane shell length: 21 inches, 40 inches (1 core),80 inches (2 cores),120 inches (3 cores),160 inches (4 cores),200 inches (5 cores),240 inches (6 cores),280 inches (7 cores)
Jul 28,2022
Water treatment equipment identifies and processes chemicals
For non-carcinogens, there is a clear dose-response relationship for their toxic effects, which do not cause harmful effects below a certain dose level, which is called the "threshold". Water treatment equipment When setting limits for these chemicals, they are calculated based on the Tolerated Daily Intake (TDI).
Jan 10,2022
Maintenance skills after installation of reverse osmosis equipment
With the development of the industrial field, the requirements of industrial water are getting higher and higher, and many processes in industrial production need to use water, and these water quality requirements are often higher than ordinary tap water, so the industrial water treatment industry has emerged. Industrial production of reverse osmosis water purification equipment can produce pure water system can be used in a wide range of areas of product manufacturing, generally gained more and more consumer recognition. However, many users have a weak awareness of the maintenance of reverse osmosis water purification equipment for industrial production, so there are many unnecessary losses in subsequent use. Reverse osmosis pure water treatment system generally includes pretreatment system, reverse osmosis device, post-treatment system, cleaning system and electrical control system.
Nov 12,2021
Reverse osmosis equipment troubleshooting
① Electrical circuit failure, such as fuse failure, wire falling off ② The thermal protection element is not reset after protection ③ Undervoltage of waterway, check fuse and check wiring ② Reset of thermal protection element ③ Check the waterway and ensure the water supply pressure